Pedrollo CP/CPM Centrifugal Pump – Standard, 230V/400V, 0.25–2.2kW

The Pedrollo CP/CPM Centrifugal Pump range is a reliable line of single-stage centrifugal pumps built for general-purpose water transfer and pressure-boosting duty. The standard range covers nine model sizes from 0.25kW to 2.2kW, available in single-phase 230V (CPm) or three-phase 400V (CP) motor versions, and suits domestic, garden and small commercial applications where moderate head and higher flow are needed. Selected models are also available bundled with a pressure tank or Easy Press 2 electronic controller.

• Application: Domestic water supply, garden and irrigation systems, tank transfer, small commercial pressure-boosting.
• Motor options: Single-phase 230V (CPm range) or three-phase 400V (CP range).
• Power range: 0.25kW (0.33HP) to 2.2kW (3HP) across 9 model sizes.
• Performance: Max head from 16m up to 56m, and flow rates up to 150–160 L/min depending on model.
• Pump type: Single-stage centrifugal, higher flow than the peripheral (PK) range at a given size.
• Motor efficiency: IE2 (100–130 models) or IE3 (132–200 models) three-phase motor class (IEC 60034-30-1); range meets Minimum Efficiency Index (MEI) ≥ 0.40.

Key Features

• Centrifugal design: Delivers higher flow rates than a peripheral impeller pump of similar power, suited to general water transfer rather than high-pressure duty alone.
• Choice of motor: Single-phase 230V (CPm) models work off a standard household supply; three-phase 400V (CP) models suit properties or sites with a 3-phase electrical connection.
• Nine size options: Sized from 0.25kW up to 2.2kW so you can match the pump to your required head and flow.
• Twin-outlet 170M variant: The CPm170M / CP170M shares the CPm170 / CP170 curve but is a distinct model – confirm which you need before ordering.

Typical Applications

• Domestic water supply and pressure boosting
• Garden and small-scale irrigation systems
• Tank-to-house or borehole-to-tank transfer
• Farm and smallholding water supply
• Small commercial systems needing moderate head at higher flow

Technical Specifications

Performance figures are read from the manufacturer's Q/H curve at the flow points supplied and are for guidance only. Model CPm132A / CP132A corresponds to the "CPm132 / CP132" curve on the manufacturer's chart. Tolerance of characteristic curves complies with EN ISO 9906 Grade 3B.

Configuration Options

Most models are sold as "Pump Only". Selected single-phase models are also available bundled with an accessory:

• + Aquasystems Tank (25L/60L/100L): Pump supplied with a pressure/expansion tank of the stated capacity for autoclave-style installations.
• + Easy Press 2 (1.5 Bar Blue Dot): Pump supplied with Pedrollo's Easy Press 2 electronic pressure controller, standard 1.5 bar restart pressure version – automatically starts/stops the pump on demand and protects against dry running, without necessarily needing a separate pressure tank.
• + Easy Press 2 (2.2 Bar Red Dot): As above, with the higher 2.2 bar restart pressure version.

Confirm exact kit contents (fittings, brackets, cabling) with Zisabo before ordering, as these are not itemised by the supplier beyond the tank/controller unit itself.

What's Included

• 1 x Pedrollo centrifugal pump (model and phase as selected)
• Plus the tank or controller listed in the Configuration option, where selected

Please note: Installation fittings, electrical protection, control boxes, cables, unions, brackets, or accessories are not included unless specifically listed above.

Installation & Compatibility Notes

• Confirm your required flow rate and head against the table above before ordering.
• Single-phase 230V (CPm) models run off a standard household supply. Three-phase 400V (CP) models require a 3-phase electrical connection and installation by a qualified electrician.
• Confirm connection size and pipe compatibility with Zisabo before ordering.
• Qualified installation is recommended, particularly for three-phase wiring, electrical protection, and any control box requirements.
• Need a stainless-steel wetted end for aggressive or corrosive water? See the Pedrollo ST4 stainless steel range instead.

Warranty & Support

This product is supplied with the applicable manufacturer or supplier warranty, subject to correct installation, correct application, and warranty terms.

Zisabo supplies quality plumbing, pump, filtration and electrical products with practical support to help customers choose the correct item for their application. If you are unsure whether this product is suitable, contact us before ordering and our team will assist where possible.

Need help choosing? If you're unsure which model, phase or configuration suits your system, contact Zisabo with your required flow rate, head, pipe size, and available power supply, and we'll help you select the correct pump.